EGL--鼠标类头文件 MOUSE.H

类别:编程语言 点击:0 评论:0 推荐:

/*
 MOUSE.H
 代码编写: 王家宝
 最后更新日期: 2000.04.01

 用途: 获取鼠标动作,对鼠标进行简单控制
*/

#define DOUBLE_CLICK_TIME 4 /* define the double time as 1 second */
int MOUSE_VISIBLE=0; /*mouse cursor is showed or hide showed 1,hide 0*/

int MOUSE_THERE=0;  /* if mouse have */
int MOUSENUM=2;   /* the mouse key's numbers */
int BSTATE=0;   /* the button's wherthe or not is pressed */
int CMX=0,CMY=0;  /* the mouse's x coords,y coords */
int MOUSE_MOVED=0;
unsigned char LBUTTON_DOWN=0,
       RBUTTON_DOWN=0,
       LBUTTON_UP=0,
       RBUTTON_UP=0;     /* the each mouse button's status */

int MS_ARROW[32]={0x9fff,0x8fff,0x87ff,0x83ff,0x81ff,0x80ff,0x80ff,0x803f,
  0x801f,0x800f,0x80ff,0x887f,0x987f,0xfc3f,0xfc3f,0xfe3f,
  0x0000,0x2000,0x3000,0x3800,0x3c00,0x3e00,0x3f00,0x3f80,
  0x3fc0,0x3e00,0x3600,0x2300,0x0300,0x0180,0x0180,0x0000
  };  /* set mouse cursor "^\" */
int MS_IBEAM[32]={0xe187,0xe007,0xfc3f,0xfc3f,0xfc3f,0xfc3f,0xfc3f,0xfc3f,
  0xfc3f,0xfc3f,0xfc3f,0xfc3f,0xfc3f,0xfc3f,0xe007,0xe187,
  0x0000,0x0e70,0x0180,0x0180,0x0180,0x0180,0x0180,0x0180,
  0x0180,0x0180,0x0180,0x0180,0x0180,0x0180,0x0e70,0x0000
  };  /* set mouse cursor " I " */
int MS_WAIT[32]={0x8001,0xc003,0xc003,0xc003,0xc003,0xe007,0xf00f,0xf81f,
        0xf81f,0xf00f,0xe007,0xc003,0xc003,0xc003,0xc003,0x8001,
        0x7ffe,0x2004,0x2004,0x2004,0x2664,0x13c8,0x0990,0x0420,
        0x0420,0x0990,0x13c8,0x27e4,0x2ff4,0x2ff4,0x2004,0x7ff3
        };  /* set mouse cursor waitting cursor */
int MS_HAND[32]={0xf3ff,0xe1ff,0xe1ff,0xe1ff,0xe001,0xe000,0xe000,0xe000,
   0x8000,0x0,0x0,0x0,0x0,0x0,0x8001,0xc003,
   0xc00,0x1200,0x1200,0x1200,0x13fe,0x1249,0x1249,0x1249,
   0x7249,0x9001,0x9001,0x9001,0x8001,0x8001,0x4002,0xeffc
   };  /* set hand cursor */
/* the above three num group is used by mouse function 9 */

extern void far event_handler(void);
void pascal set_event_handler(int call_mask,void far( *location)());
void near event_processor(int event_status,int button_status,int x,int y);
int  reset_mouse(void);  /* reset the mouse with the start num */
void mouse_shape(int shape[32],int hotx,int hoty);
    /* change the graphics mouse's shape */
void mouse_on();  /* turn on the mouse cursor */
void mouse_off();  /* turn off the mouse cursor */
void set_mouse_position(int x,int y);
    /* put the mouse position at x,y */
void reset_event_status(void); /* reset the LBUTTON_DOWN=0.... */
void InstallEvent(void);
void set_mousex(int minx,int maxx);
void set_mousey(int miny,int maxy);

本文地址:http://com.8s8s.com/it/it25109.htm