在VB中实现任意文件的16进制方式察看

       这是我利用文件操作方法编写的文件16进制察看软件。本来是可以利用UltraEdit来干这件事的。我编写的目的就是想看一下自己能不能编出来。于是我就用VB编了一下，先前我只是把源代码直接放到网上，没想到大家很支持我，给了我很大的鼓舞，在这里我十分感谢eastunfail的帮助，使我的代码更加完善。

源代码如下：

Dim col As ColumnHeader
Dim litem As ListItem
Dim sb As ListSubItem
Dim filename As String
Dim index As Long

Private Sub Command1_Click()
Dim b As Byte
'Dim ff() As Byte
Dim fl As Long
Dim sect As Long
Dim ss As Long

ListView1.ListItems.Clear

dlg.ShowOpen
filename = dlg.filename
fl = FileLen(filename)
sect = fl / 16
ss = fl Mod 16

Open filename For Binary As #1
  If sect = 0 Then
    Set litem = ListView1.ListItems.Add()
    For index = 1 To ss
    Get #1, index, b
    Set sb = litem.ListSubItems.Add(index, , DecToHex(b))
    Next index
  End If
 
  If sect <> 0 Then
  For i = 1 To sect
  Set litem = ListView1.ListItems.Add()
    For index = 1 To 16
      Get #1, 16 * (i - 1) + index, b
      Set sb = litem.ListSubItems.Add(index, , DecToHex(b))
    Next index
  Next i
  Set litem = ListView1.ListItems.Add()
  For index = 1 To ss
   Get #1, index, b
   Set sb = litem.ListSubItems.Add(index, , DecToHex(b))
  Next index
  End If
Close #1

End Sub

Private Sub Command2_Click()
MsgBox "Welcome To Three Leaf WorkRoom!!", , "About"
End Sub

Private Sub Form_Load()
Dim i As Integer

ListView1.ColumnHeaders.Add , , "Address", ListView1.Width / 14

For i = 1 To 16
Set col = ListView1.ColumnHeaders.Add()
   col.Text = "+" & DecToHex(i - 1)
   col.Width = ListView1.Width / 25
Next

ListView1.ColumnHeaders.Add , , "ASCII", ListView1.Width / 4

End Sub

Private Function DecToHex(dd As Byte) As String
DecToHex=IIf(Dec>&HF,Hex(dd),"0" & Hex(dd))    '这行代码是eastunfail提供的。
End Function

本文地址：http://com.8s8s.com/it/it6475.htm