测试系统扫描的功能

类别:编程语言 点击:0 评论:0 推荐:

1)在192.168.88.55上安装rh9,内核版本为2.4.20-8,下载http://download.insecure.org/nmap/dist/nmap-3.30-1.i386.rpm。执行rpm -Uvh nmap-3.30-1.i386.rpm安装。

2)在服务器端执行:

nmap –sP 192.168.88.50

结果:

Starting nmap 3.30 ( http://www.insecure.org/nmap/ ) at 2003-09-16 11:18 CST

Note: Host seems down. If it is really up, but blocking our ping probes, try -P0

Nmap run completed -- 1 IP address (0 hosts up) scanned in 12.046 seconds

 

执行:nmap –sT 192.168.88.50

结果:

Starting nmap 3.30 ( http://www.insecure.org/nmap/ ) at 2003-09-16 11:21 CST

Interesting ports on 192.168.88.50:

(The 1638 ports scanned but not shown below are in state: closed)

Port       State       Service

80/tcp     open        http

135/tcp    open        loc-srv

139/tcp    open        netbios-ssn

1025/tcp   open        NFS-or-IIS

1433/tcp   open        ms-sql-s

3372/tcp   open        msdtc

 

Nmap run completed -- 1 IP address (1 host up) scanned in 0.449 seconds

 

执行:nmap -sU 192.168.88.50

结果:

Starting nmap 3.30 ( http://www.insecure.org/nmap/ ) at 2003-09-16 11:21 CST

Interesting ports on 192.168.88.50:

(The 1467 ports scanned but not shown below are in state: closed)

Port       State       Service

135/udp    open        loc-srv

137/udp    open        netbios-ns

138/udp    open        netbios-dgm

1434/udp   open        ms-sql-m

 

Nmap run completed -- 1 IP address (1 host up) scanned in 6.175 seconds

本文地址:http://com.8s8s.com/it/it25574.htm