Tutorial 5: Section Table
Theory:
Up to this tutorial, we learned about the DOS header, the PE header. What remains is the section table. A section table is actually an array of structure immediately following the PE header. The number of the array members is determined by NumberOfSections field in the file header (IMAGE_FILE_HEADER) structure. The structure is called IMAGE_SECTION_HEADER.
IMAGE_SIZEOF_SHORT_NAME equ 8
IMAGE_SECTION_HEADER STRUCT
Name1 db IMAGE_SIZEOF_SHORT_NAME dup(?)
union Misc
PhysicalAddress dd ?
VirtualSize dd ?
ends
VirtualAddress dd ?
SizeOfRawData dd ?
PointerToRawData dd ?
PointerToRelocations dd ?
PointerToLinenumbers dd ?
NumberOfRelocations dw ?
NumberOfLinenumbers dw ?
Characteristics dd ?
IMAGE_SECTION_HEADER ENDS
Again, not all members are useful. I'll describe only the ones that are really important.
Field Meanings Name1 Actually the name of this field is "name" but the word "name" is an MASM keyword so we have to use "Name1" instead. This member contains the name of the section. Note that the maximum length is 8 bytes. The name is just a label, nothing more. You can use any name or even leave this field blank. Note that there is no mention of the terminating null. The name is not an ASCIIZ string so don't expect it to be terminated with a null. VirtualAddress The RVA of the section. The PE loader examines and uses the value in this field when it's mapping the section into memory. Thus if the value in this field is 1000h and the PE file is loaded at 400000h, the section will be loaded at 401000h. SizeOfRawData The size of the section's data rounded up to the next multiple of file alignment. The PE loader examines the value in this field so it knows how many bytes in the section it should map into memory. PointerToRawData The file offset of the beginning of the section. The PE loader uses the value in this field to find where the data in the section is in the file. Characteristics Contains flags such as whether this section contains executable code, initialized data, uninitialized data, can it be written to or read from.Now that we know about IMAGE_SECTION_HEADER structure, let's see how we can emulate the PE loader's job:
Read NumberOfSections in IMAGE_FILE_HEADER so we know how many sections there are in the file. Use the value in SizeOfHeaders as the file offset of the section table and moves the file pointer to that offset. Walk the structure array, examining each member. For each structure, we obtain the value in PointerToRawData and move the file pointer to that offset. Then we read the value in SizeOfRawData so we know how many bytes we should map into memory. Read the value in VirtualAddress and add the value in ImageBase to it to get the virtual address the section should start from. And then we are ready to map the section into memory and mark the attribute of the memory according to the flags in Characteristics. Walk the array until all the sections are processed.Note that we didn't make use the the name of the section: it's not really necessary.
Example:This example opens a PE file and walks the section table, showing the information about the sections in a listview control.
.386
.model flat,stdcall
option casemap:none
include \masm32\include\windows.inc
include \masm32\include\kernel32.inc
include \masm32\include\comdlg32.inc
include \masm32\include\user32.inc
include \masm32\include\comctl32.inc
includelib \masm32\lib\comctl32.lib
includelib \masm32\lib\user32.lib
includelib \masm32\lib\kernel32.lib
includelib \masm32\lib\comdlg32.lib
IDD_SECTIONTABLE equ 104
IDC_SECTIONLIST equ 1001
SEH struct
PrevLink dd ? ; the address of the previous seh structure
CurrentHandler dd ? ; the address of the new exception handler
SafeOffset dd ? ; The offset where it's safe to continue execution
PrevEsp dd ? ; the old value in esp
PrevEbp dd ? ; The old value in ebp
SEH ends
.data
AppName db "PE tutorial no.5",0
ofn OPENFILENAME <>
FilterString db "Executable Files (*.exe, *.dll)",0,"*.exe;*.dll",0
db "All Files",0,"*.*",0,0
FileOpenError db "Cannot open the file for reading",0
FileOpenMappingError db "Cannot open the file for memory mapping",0
FileMappingError db "Cannot map the file into memory",0
FileInValidPE db "This file is not a valid PE",0
template db "%08lx",0
SectionName db "Section",0
VirtualSize db "V.Size",0
VirtualAddress db "V.Address",0
SizeOfRawData db "Raw Size",0
RawOffset db "Raw Offset",0
Characteristics db "Characteristics",0
.data?
hInstance dd ?
buffer db 512 dup(?)
hFile dd ?
hMapping dd ?
pMapping dd ?
ValidPE dd ?
NumberOfSections dd ?
.code
start proc
LOCAL seh:SEH
invoke GetModuleHandle,NULL
mov hInstance,eax
mov ofn.lStructSize,SIZEOF ofn
mov ofn.lpstrFilter, OFFSET FilterString
mov ofn.lpstrFile, OFFSET buffer
mov ofn.nMaxFile,512
mov ofn.Flags, OFN_FILEMUSTEXIST or OFN_PATHMUSTEXIST or OFN_LONGNAMES or OFN_EXPLORER or OFN_HIDEREADONLY
invoke GetOpenFileName, ADDR ofn
.if eax==TRUE
invoke CreateFile, addr buffer, GENERIC_READ, FILE_SHARE_READ, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL
.if eax!=INVALID_HANDLE_VALUE
mov hFile, eax
invoke CreateFileMapping, hFile, NULL, PAGE_READONLY,0,0,0
.if eax!=NULL
mov hMapping, eax
invoke MapViewOfFile,hMapping,FILE_MAP_READ,0,0,0
.if eax!=NULL
mov pMapping,eax
assume fs:nothing
push fs:[0]
pop seh.PrevLink
mov seh.CurrentHandler,offset SEHHandler
mov seh.SafeOffset,offset FinalExit
lea eax,seh
mov fs:[0], eax
mov seh.PrevEsp,esp
mov seh.PrevEbp,ebp
mov edi, pMapping
assume edi:ptr IMAGE_DOS_HEADER
.if [edi].e_magic==IMAGE_DOS_SIGNATURE
add edi, [edi].e_lfanew
assume edi:ptr IMAGE_NT_HEADERS
.if [edi].Signature==IMAGE_NT_SIGNATURE
mov ValidPE, TRUE
.else
mov ValidPE, FALSE
.endif
.else
mov ValidPE,FALSE
.endif
FinalExit:
push seh.PrevLink
pop fs:[0]
.if ValidPE==TRUE
call ShowSectionInfo
.else
invoke MessageBox, 0, addr FileInValidPE, addr AppName, MB_OK+MB_ICONINFORMATION
.endif
invoke UnmapViewOfFile, pMapping
.else
invoke MessageBox, 0, addr FileMappingError, addr AppName, MB_OK+MB_ICONERROR
.endif
invoke CloseHandle,hMapping
.else
invoke MessageBox, 0, addr FileOpenMappingError, addr AppName, MB_OK+MB_ICONERROR
.endif
invoke CloseHandle, hFile
.else
invoke MessageBox, 0, addr FileOpenError, addr AppName, MB_OK+MB_ICONERROR
.endif
.endif
invoke ExitProcess, 0
invoke InitCommonControls
start endp
SEHHandler proc uses edx pExcept:DWORD,pFrame:DWORD,pContext:DWORD,pDispatch:DWORD
mov edx,pFrame
assume edx:ptr SEH
mov eax,pContext
assume eax:ptr CONTEXT
push [edx].SafeOffset
pop [eax].regEip
push [edx].PrevEsp
pop [eax].regEsp
push [edx].PrevEbp
pop [eax].regEbp
mov ValidPE, FALSE
mov eax,ExceptionContinueExecution
ret
SEHHandler endp
DlgProc proc uses edi esi hDlg:DWORD, uMsg:DWORD, wParam:DWORD, lParam:DWORD
LOCAL lvc:LV_COLUMN
LOCAL lvi:LV_ITEM
.if uMsg==WM_INITDIALOG
mov esi, lParam
mov lvc.imask,LVCF_FMT or LVCF_TEXT or LVCF_WIDTH or LVCF_SUBITEM
mov lvc.fmt,LVCFMT_LEFT
mov lvc.lx,80
mov lvc.iSubItem,0
mov lvc.pszText,offset SectionName
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTCOLUMN,0,addr lvc inc lvc.iSubItem
mov lvc.fmt,LVCFMT_RIGHT
mov lvc.pszText,offset VirtualSize
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTCOLUMN,1,addr lvc
inc lvc.iSubItem
mov lvc.pszText,offset VirtualAddress
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTCOLUMN,2,addr lvc
inc lvc.iSubItem
mov lvc.pszText,offset SizeOfRawData
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTCOLUMN,3,addr lvc
inc lvc.iSubItem
mov lvc.pszText,offset RawOffset
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTCOLUMN,4,addr lvc
inc lvc.iSubItem
mov lvc.pszText,offset Characteristics
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTCOLUMN,5,addr lvc
mov ax, NumberOfSections
movzx eax,ax
mov edi,eax
mov lvi.imask,LVIF_TEXT
mov lvi.iItem,0
assume esi:ptr IMAGE_SECTION_HEADER
.while edi>0
mov lvi.iSubItem,0
invoke RtlZeroMemory,addr buffer,9
invoke lstrcpyn,addr buffer,addr [esi].Name1,8
lea eax,buffer
mov lvi.pszText,eax
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTITEM,0,addr lvi
invoke wsprintf,addr buffer,addr template,[esi].Misc.VirtualSize
lea eax,buffer
mov lvi.pszText,eax
inc lvi.iSubItem
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_SETITEM,0,addr lvi
invoke wsprintf,addr buffer,addr template,[esi].VirtualAddress
lea eax,buffer
mov lvi.pszText,eax
inc lvi.iSubItem
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_SETITEM,0,addr lvi
invoke wsprintf,addr buffer,addr template,[esi].SizeOfRawData
lea eax,buffer
mov lvi.pszText,eax
inc lvi.iSubItem
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_SETITEM,0,addr lvi
invoke wsprintf,addr buffer,addr template,[esi].PointerToRawData
lea eax,buffer
mov lvi.pszText,eax
inc lvi.iSubItem
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_SETITEM,0,addr lvi
invoke wsprintf,addr buffer,addr template,[esi].Characteristics
lea eax,buffer
mov lvi.pszText,eax
inc lvi.iSubItem
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_SETITEM,0,addr lvi
inc lvi.iItem
dec edi
add esi, sizeof IMAGE_SECTION_HEADER
.endw
.elseif
uMsg==WM_CLOSE
invoke EndDialog,hDlg,NULL
.else
mov eax,FALSE
ret
.endif
mov eax,TRUE
ret
DlgProc endp
ShowSectionInfo proc uses edi
mov edi, pMapping
assume edi:ptr IMAGE_DOS_HEADER
add edi, [edi].e_lfanew
assume edi:ptr IMAGE_NT_HEADERS
mov ax,[edi].FileHeader.NumberOfSections
movzx eax,ax
mov NumberOfSections,eax
add edi,sizeof IMAGE_NT_HEADERS
invoke DialogBoxParam, hInstance, IDD_SECTIONTABLE,NULL, addr DlgProc, edi
ret
ShowSectionInfo endp
end start
This example reuses the code of the example in PE tutorial 2. After it verifies that the file is a valid PE, it calls a function, ShowSectionInfo.
ShowSectionInfo proc uses edi
mov edi, pMapping
assume edi:ptr IMAGE_DOS_HEADER
add edi, [edi].e_lfanew
assume edi:ptr IMAGE_NT_HEADERS
We use edi as the pointer to the data in the PE file. At first, we initialize it to the value of pMapping which is the address of the DOS header. Then we add the value in e_lfanew to it so it now contains the address of the PE header.
mov ax,[edi].FileHeader.NumberOfSections
mov NumberOfSections,ax
Since we need to walk the section table, we must obtain the number of sections in this file. That's the value in NumberOfSections member of the file header. Don't forget that this member is of word size.
add edi,sizeof IMAGE_NT_HEADERS
Edi currently contains the address of the PE header. Adding the size of the PE header to it will make it point at the section table.
invoke DialogBoxParam, hInstance, IDD_SECTIONTABLE,NULL, addr DlgProc, edi
Call DialogBoxParam to show the dialog box containing the listview control. Note that we pass the address of the section table as its last parameter. This value will be available in lParam during WM_INITDIALOG message.
In the dialog box procedure, in response to WM_INITDIALOG message, we store the value of lParam (address of the section table) in esi, the number of sections in edi and then dress up the listview control. When everything is ready, we enter a loop which will insert the info about each section into the listview control. This part is very simple.
.while edi>0
mov lvi.iSubItem,0
Put this string in the first column.
invoke RtlZeroMemory,addr buffer,9
invoke lstrcpyn,addr buffer,addr [esi].Name1,8
lea eax,buffer
mov lvi.pszText,eax
We will display the name of the section but we must convert it to an ASCIIZ string first.
invoke SendDlgItemMessage,hDlg,IDC_SECTIONLIST,LVM_INSERTITEM,0,addr lvi
Then we display it in the first column.
We continue with this scheme until the last value we want to display for this section is displayed. Then we must move to the next structure.
dec edi
add esi, sizeof IMAGE_SECTION_HEADER
.endw
We decrement the value in edi for each section processed. And we add the size of IMAGE_SECTION_HEADER to esi so it contains the address of the next IMAGE_SECTION_HEADER structure.
The steps in walking the section table are:
Verify that the file is a valid PE Go to the beginning of the PE header Obtain the number of sections from NumberOfSections field in the file header. Go to the section table either by adding ImageBase to SizeOfHeaders or by adding the address of the PE header to the size of the PE header. (The section table immediately follows the PE header). If you don't use file mapping, you need to move the file pointer to the section table using SetFilePointer. The file offset of the section table is in SizeOfHeaders.(SizeOfHeaders is a member of IMAGE_OPTIONAL_HEADER) Process each IMAGE_SECTION_HEADER structure.[Iczelion's Win32 Assembly Homepage]
本文地址：http://com.8s8s.com/it/it30018.htm