1、要在Linux上使用CF无线网卡，必须在编译内核时选择network device support->Wirless Lan(non-hamradio)选项。
2、编译orinoco驱动程序，在编译的时候，注意修改Makefile中的Kernel_SRC到内核源代码目录
3、将编译好的驱动程序hermes.o、orinoco.o和orinoco_cs.o拷贝到目标板上的/lib/module/$(内核版本)／pcmcia目录下
4、修改/etc/pcmcia/config文件如下：
# Device driver definitions
device "memory_cs" needs_mtd
class "memory" module "memory_cs"
device "serial_cs"
class "serial" module "serial_cs"
device "ide_cs"
class "ide" module "ide_cs"
device "dummy_cs"
class "dummy" module "dummy_cs"
device "orinoco_cs"
class "network" module "hermes","orinoco","orinoco_cs"
#对应鹰泰的CF无线网卡
card "D-Link DWL-650 11 Mbps WLAN Card"
version "Wireless", "LAN Adapter", "Version 01.02",""
bind "orinoco_cs"
#对应神脑的CF无线网卡
card "Senao Wireless CompactFlash Card"
version "WLAN","11Mbps_PC-Card_3.0","ISL37100P","ISL37100P"
manfid 0x000b,0x7100
bind "orinoco_cs"
card "ATA/IDE Fixed Disk"
function fixed_disk
bind "ide_cs"
# Include local configuration settings
source ./config.opts
5、修改/etc/network.opts文件中IP地址为所需要的IP
6、重新启动目标板或者重新启动pcmcia，无线网卡就可以工作了。
本文地址：http://com.8s8s.com/it/it33085.htm