HTTP Link
Print
Email
Submitted on: 3/2/2004 11:59:07 AM
By: t0rus
Level: Beginner
User Rating: Unrated
Compatibility:Delphi 7, Delphi 6
Users have accessed this article 1657 times.
There are at least 3 ways to create an http link on your form, i'll describe 2 of them here.
Terms of Agreement:
By using this article, you agree to the following terms...
1) You may use this article in your own programs (and may compile it into a program and distribute it in compiled format for languages that allow it) freely and with no charge.
2) You MAY NOT redistribute this article (for example to a web site) without written permission from the original author. Failure to do so is a violation of copyright laws.
3) You may link to this article from another website, but ONLY if it is not wrapped in a frame.
4) You will abide by any additional copyright restrictions which the author may have placed in the article or article's description.
First, you need to create a button/label/whatever, then you'll have this procedure...
procedure Tform1.Button1Click(Sender: TObject);
const
csOLEObjName = 'InternetExplorer.Application';
var
IE : Variant;
begin
IE := CreateOleObject( csOLEObjName );
IE.Visible := true;
IE.Navigate('http://www.yahoo.com');
end;
the unit that u'll need for this application should be automatically added to the Uses if not, just add Uses ComOBJ there but this only works if you have internet explorer installed.
the SECOND method should work regardless of your browser:
ShellExecute(0,'open','http://www.yahoo.com','','',SW_SHOWNORMAL);
for this one, you'll need to have Uses ShellAPI
the third method, consists of simply downloading a component that has http link, and adding it to your form, but that's up to you to look for one
本文地址：http://com.8s8s.com/it/it4745.htm