jmail4.1用pop3收信的例子
<% Set pop3 = Server.CreateObject( "JMail.POP3" )
'pop3的连接用户名，密码，pop3地址
pop3.Connect "username", "password", "mail.mydomain.com"
Response.Write( "你有" & pop3.count & " 封邮件。<br><br>" )
if pop3.count > 0 then
Set msg = pop3.Messages.item(1)
ReTo = ""
ReCC = ""
Set Recipients = msg.Recipients
separator = ", "
' 现在得到所有的收件人，并且存储
For i = 0 To Recipients.Count - 1
If i = Recipients.Count - 1 Then
separator = ""
End If
Set re = Recipients.item(i)
If re.ReType = 0 Then
ReTo = ReTo & re.Name & " (<a href=""mailto:"& re.EMail &""">" & re.EMail & "</a>)" & separator
else
ReCC = ReTo & re.Name & " (<a href=""mailto:"& re.EMail &""">" & re.EMail & "</a>)" & separator
End If
Next
'这个程序得到附件，并且保存到服务器的硬盘上。也可以返回附件的详细连接
Function getAttachments()
Set Attachments = msg.Attachments
separator = ", "
For i = 0 To Attachments.Count - 1
If i = Attachments.Count - 1 Then
separator = ""
End If
Set at = Attachments(i)
at.SaveToFile( "c:\EMail\attachments\" & at.Filename )
getAttachments = getAttachments & "<a href=""/EMail/attachments/" & at.Filename &""">" &_
at.FileName & "(" & at.Size & " bytes)" & "</a>" & separator
Next
End Function
%>
<html>
<body>
<TABLE>
<tr>
<td>邮件标题</td>
<td><%= msg.Subject %></td>
</tr>
<tr>
<td>发件人</td>
<td><%= msg.FromName %></td>
</tr>
<tr>
<td>收件人</td>
<td><%= ReTO %></td>
</tr>
<tr>
<td>抄送</td>
<td><%= ReCC %></td>
</tr>
<tr>
<td>附件</td>
<td><%= getAttachments %></td>
</tr>
<tr>
<td>内容</td>
<td><pre><%= msg.Body %></pre></td>
</tr>
</TABLE>
</body>
</html>
<% end if
pop3.Disconnect
%>
本文地址：http://com.8s8s.com/it/it9424.htm