[root@localhost
root]# /sbin/adsl-setup
Welcome
to the ADSL client setup. First, I will run some checks on
your
system to make sure the PPPoE client is installed properly...
LOGIN
NAME
Enter
your Login Name (default root): (username)
INTERFACE
Enter
the Ethernet interface connected to the ADSL modem
For
Solaris, this is likely to be something like /dev/hme0.
For
Linux, it will be ethX, where 'X' is a number.
(default
eth0):
Do you
want the link to come up on demand, or stay up continuously?
If you
want it to come up on demand, enter the idle time in seconds
after
which the link should be dropped. If you want the link to
stay up
permanently, enter 'no' (two letters, lower-case.)
NOTE:
Demand-activated links do not interact well with dynamic IP
addresses.
You may have some problems with demand-activated links.
Enter
the demand value (default no):
DNS
Please
enter the IP address of your ISP's primary DNS server.
If your
ISP claims that 'the server will provide dynamic DNS addresses',
enter
'server' (all lower-case) here.
If you
just press enter, I will assume you know what you are
doing
and not modify your DNS setup.
Enter
the DNS information here: server
PASSWORD
Please
enter your Password:
Please
re-enter your Password:
USERCTRL
Please
enter 'yes' (two letters, lower-case.) if you want to allow
normal
user to start or stop DSL connection (default yes): y
FIREWALLING
Please
choose the firewall rules to use. Note that these rules are
very
basic. You are strongly encouraged to use a more sophisticated
firewall
setup; however, these will provide basic security. If you
are
running any servers on your machine, you must choose 'NONE' and
set up
firewalling yourself. Otherwise, the firewall rules will deny
access
to all standard servers like Web, e-mail, ftp, etc. If you
are
using SSH, the rules will block outgoing SSH connections which
allocate
a privileged source port.
The
firewall choices are:
0 -
NONE: This script will not set any firewall rules. You are
responsible
for
ensuring the security of your machine. You are STRONGLY
recommended
to use some kind of firewall rules.
1 -
STANDALONE: Appropriate for a basic stand-alone web-surfing
workstation
2 -
MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a
LAN
Choose a
type of firewall (0-2): 0
Start
this connection at boot time
Do you
want to start this connection at boot time?
Please
enter no or yes (default no):y
**
Summary of what you entered **
Ethernet
Interface: eth0
User
name: czxw6294
Activate-on-demand:
No
DNS
addresses: Supplied by ISP's server
Firewalling:
NONE
User
Control: y
Accept
these settings and adjust configuration files (y/n)? y
Adjusting
/etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting
/etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But
first backing it up to /etc/ppp/chap-secrets.bak)
(But
first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations,
it should be all set up!
Type
'/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring
it down.
Type
'/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see
the link status.
[root@localhost
root]#
本文地址：http://com.8s8s.com/it/it35512.htm