Asp：ASP控制虚拟主机函数ADSI

热点排行

ASP控制虚拟主机函数ADSI

类别：Asp 点击：0 评论：0 推荐：

使用ASP设置指定站点CPU最大使用程度
'=================================================
'函数介绍：设置指定站点CPU最大使用程度
'本函数使用ADSI，需要Administrators组用户权限
'函数名称：SetCPULimitVar (Computer,SiteNum,LimitVar)
'用法：SetCPULimitVar 计算机名，站点编号，最大限制值（100=1%，1000=10%）
'例：SetCPULimitVar "LocalHost","2","2000"
'=================================================
Function SetCPULimitVar(Computer,SiteNum,LimitVar)
Set MyObj001 = GetObject("IIS://"&Computer&"/W3SVC/"&SiteNum)
'设置启用CPU限制
MyObj001.CpuLimitsEnabled = True
'设置限制使用额度值
MyObj001.CpuLimitLogEvent=LimitVar
MyObj001.setinfo
Set MyObj001=Nothing
End Function

使用ASP在IIS创建WEB站点的函数
'=============================================================
'函数介绍：创建WebSite
'本函数使用ADSI，需要Administrators组用户权限
'函数名称：CreateWebSite(Computer,IPAddr,PortNum,HostName,WebSiteDirectory,LogDirectory,WebSiteInfo,GuestUserName,GuestUserPass,StartOrStop)
'用法：CreateWebSite 计算机名(一搬为LocalHost或127.0.0.1),站点IP地址,端口号,主机名,站点根目录,,LOG文件的目录站点说明,网站访问时所使用的帐号,网站访问时所用帐号的口令,是否启动站点
'例：CreateWebSite "LocalHost","127.0.0.123","80","www.test.net","E:\UserData\UserNum001","E:\UserData\UserNum001\LogFiles","wwwtest.net","IUSR_Num001_test.net","abc888",True
'=============================================================
Function CreateWebSite(Computer,IPAddr,PortNum,HostName,WebSiteDirectory,LogDirectory,WebSiteInfo,GuestUserName,GuestUserPass,StartOrStop)
Dim w3svc, WebServer, NewWebServer, NewDir
Dim Bindings, BindingString, NewBindings, SiteNum, SiteObj, bDone
On Error Resume Next
Err.Clear
'检测是否能够加载W3SVC服务（即WEB服务）
Set w3svc = GetObject("IIS://" & Computer & "/w3svc")
If Err.Number <> 0 Then '显示错误提示
 response.write "无法打开: "&"IIS://" & Computer & "/w3svc"
 response.end
End If
'检测是否有设定相同IP地址、端口及主机名的站点存在
BindingString = IPAddr & ":" & PortNum & ":" & HostName
For Each WebServer in w3svc
 If WebServer.Class = "IIsWebServer" Then
 Bindings = WebServer.ServerBindings
 If BindingString = Bindings(0) Then
 response.write "IP地址冲突:" & IPAddr & ",请检测IP地址！."
 Exit Function
 End If
 End If
Next

'确定一个不存在的站点编号做为新建站点编号，系统默认WebSite站点编号为1，因此从2开始
SiteNum=2
bDone = False
While (Not bDone)
Err.Clear
Set SiteObj = GetObject("IIS://"&Computer&"/w3svc/"&SiteNum) '加载指定站点
If (Err.Number = 0) Then
 'response.write " Step_1站点"&SiteNum&"存在"
 SiteNum = SiteNum + 1
Else
 'response.write " Step_1站点"&SiteNum&"不存在"
 Err.Clear
 Set NewWebServer = w3svc.Create("IIsWebServer",SiteNum) '创建指定站点
 If (Err.Number <> 0) Then
 'response.write " Step_2站点"&SiteNum&"创建失败"
 SiteNum = SiteNum + 1
 Else
 'response.write " Step_2站点"&SiteNum&"创建成功"
 bDone = True
 End If
End If
If (SiteNum > 50) Then '服务器最大创建站点数
 response.write "超出服务器最大创建站点数，正在创建的站点的序号为： "&SiteNum&"."
 response.end
End If
Wend

'进行站点基本配置
NewBindings = Array(0)
NewBindings(0) = BindingString
NewWebServer.ServerBindings = NewBindings
NewWebServer.ServerComment= WebSiteInfo
NewWebServer.AnonymousUserName= GuestUserName
NewWebServer.AnonymousUserPass= GuestUserPass
NewWebServer.KeyType = "IIsWebServer"
NewWebServer.FrontPageWeb = True
NewWebServer.EnableDefaultDoc = True
NewWebServer.DefaultDoc = "Default.htm, Default.asp, Index.htm, Index.asp"
NewWebServer.LogFileDirectory= LogDirectory
NewWebServer.SetInfo
Set NewDir = NewWebServer.Create("IIsWebVirtualDir", "ROOT")
NewDir.Path = WebSiteDirectory
NewDir.AccessRead = true
NewDir.AppFriendlyName = "应用程序" & WebSiteInfo
NewDir.AppCreate True
NewDir.AccessScript = True
Err.Clear
NewDir.SetInfo
If (Err.Number <> 0) Then
 response.write "主目录创建时出错."
 response.end
End If
If StartOrStop = True Then
 Err.Clear
 Set NewWebServer = GetObject("IIS://" & Computer & "/w3svc/" & SiteNum)
 NewWebServer.Start
 If Err.Number <> 0 Then
 response.write "启动站点时出错!"
 response.end
 Err.Clear
 End If
End If
response.write "站点创建成功，站点编号为："& SiteNum &" ，域名为："& HostName
End Function

使用ASP启动/停止指定WEB站点
'=============================================================
'函数介绍：使用ASP启动/停止指定WEB站点
'本函数使用ADSI，需要Administrators组用户权限
'函数名称：AdminWebSite(Computer,WebSiteNum,DoWhat)
'用法：AdminWebSite(计算机名称,站点编号,启动/停止)
'例：启动127.0.0.1计算机上站点编号为1的站点
'AdminWebSite "127.0.0.1","1",1
'例：停止127.0.0.1计算机上站点编号为1的站点
'AdminWebSite "127.0.0.1","1",0
'=============================================================
Function AdminWebSite(Computer,WebSiteNum,DoWhat)
On Error Resume Next
Set objServer = GetObject("IIS://" & Computer & "/W3SVC/" & WebSiteNum)
If Err.Number <> 0 Then
 Response.Write Now & ". 错误码: " & Hex(Err)& " - " & "无法开启指定站点 "
End If
if Dowhat=1 then
'使用Start启动站点
 objServer.Start
 If Err.Number <> 0 Then
 Response.Write "无法启动指定Web站点 "
 else
 Response.Write "已经启动指定Web站点 "
 End If
elseif DoWhat=0 then
 '使用Stop停止站点
 objServer.Stop
 If Err.Number <> 0 Then
 Response.Write "无法停止指定Web站点 "
 else
 Response.Write "已经停止指定Web站点 "
 End If
end if
End Function
使用ASP列出服务器WEB站点信息
'=============================================================
'函数介绍：列出当前服务器WEB站点信息
'本函数使用ADSI，需要Administrators组用户权限
'函数名称：ListWebSite (Computer,Num)
'用法：ListWebSite (计算机名称,显示站点数量)
'例：显示127.0.0.1计算机上1000个站点信息
'ListWebSite "127.0.0.1","1000"
'=============================================================
Function ListWebSite(Computer,Num)
On Error Resume Next
Set SiteObj = GetObject("IIS://"&Computer&"/w3svc/"&i)
for i=0 to Num
 Err.Clear
 if Err.Number=0 then
 response.write "以下显示为计算机："&Computer&"上所有站点信息"
 ShowWebSite = SiteObj.Get("ServerBindings") '获得站点IP地址:端口:主机头
 Info=split(ShowWebSite(0),":")
 response.write "站点编号："&i&" "
 response.write "站点IP地址："&Info(0)&" "
 response.write "站点端口："&Info(1)&" "
 response.write "站点主机头："&Info(2)&" "
 end if
next
set SiteOjb=nothing
End Function

使用ASP删除指定IIS站点
'=============================================================
'函数介绍：删除指定IIS站点
'本函数使用ADSI，需要Administrators组用户权限
'函数名称：DelWebSite (Computer,SiteNum)
'用法：DelWebSite 计算机名，站点编号
'例：DelWebSite "127.0.0.1","2"
'=============================================================
Function DelWebSite(Computer,SiteNum)
Set W3SVC = GetObject("IIS://"&Computer&"/w3svc")
W3SVC.delete "IIsWebServer",SiteNum
response.write "删除成功！"
End Function

通过ASP管理NT帐号
'=============================================================
'函数介绍：通过ASP管理NT帐号
'本函数使用ADSI，需要Administrators组用户权限
'=============================================================
'填加用户
'函数用法：AddUser(Computer,UserName,PassWord,FullName,Info)
'参数：计算机名,帐号名称,帐号密码,帐号全名,帐号说明
'例：AddUser "127.0.0.1","Test","Test","测试管理员帐号","本帐号通过ASP填加"
'修改指定用户基本信息
'函数用法：EditUser(Computer,UserName,OldPassWord,PassWord,FullName,Info)
'参数：计算机名,帐号名称,帐号密码,帐号全名,帐号说明
'例：EditUser "127.0.0.1","Test","Test2","测试管理员帐号修改","本帐号通过ASP修改过"
'删除指定用户
'函数用法：DelUser(Computer,UserName)
'参数：计算机名,用户名'
'例：DelUser "127.0.0.1","Test"
=============================================================
Function AddUser(Computer,UserName,PassWord,FullName,Info)
'执行创建帐号命令
Set ComputerObj = GetObject("WinNT://"&Computer)
Set NewUser = ComputerObj.Create( "User" , UserName )
NewUser.SetInfo
'进行帐号设置
NewUser.SetPassword ( PassWord ) '帐号密码
NewUser.FullName = FullName '帐号全名
NewUser.Description = Info '帐号说明
NewUser.UserFlags = &H10000 '&H20000(使用者下次登入时须变更密码) &H0040(使用者不得变更密码) &H10000(密码永久正确) &H0002(帐户暂时停用)
NewUser.SetInfo
response.write "帐号"&UserName&"创建成功！"
Set ComputerObj=nothing
End Function

Function EditUser(Computer,UserName,OldPassWord,PassWord,FullName,Info)
'读取用户信息
Set ChangeUserObj = GetObject("WinNT://"&Computer&"/"&UserName&",User")
'修改帐号密码
if PassWord<>"" then
 ChangeUserObj.SetPassword PassWord
 response.write "帐号密码修改成功！ "
end if
'修改帐号全名
if FullName<>"" then
 UserFullName = ChangeUserObj.get("FullName")
 ChangeUserObj.FullName = FullName
 ChangeUserObj.SetInfo
 response.write "帐号全名修改成功！ "
end if
'修改帐号说明
if Info<>"" then
 UserFullName = ChangeUserObj.get("Description")
 ChangeUserObj.Description = Info
 ChangeUserObj.SetInfo
 response.write "帐号说明修改成功！ "
end if
Set ChangeUserObj=nothing
End Function

Function DelUser(Computer,UserName)
Set DelUserObj = GetObject("WinNT://"&Computer&"/"&UserName)
If Err = &H800401E4 Then
Response.Write "用户"&UserName&"不存在"
Response.End
End If
Set DelObj = GetObject(DelUserObj.Parent)
DelObj.Delete "User", DelUserObj.Name
Set DelUserObj = Nothing
Set DelObj = Nothing
Response.Write "删除成功"
End Function

使用ASP控制指定站点解析脚本语言函数
Function AdminAegis(Computer,SiteNum)
Set IIsWebServiceObj = GetObject("IIS://"&Computer&"/W3SVC/"&SiteNum)
dim Aegis(1)
Aegis(0)=".asp,C:\WINNT\system32\inetsrv\asp.dll,5,GET,HEAD,POST,TRACE"
'Aegis(1)=".aspx,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG"
'解析其它文件请同样使用Aegis(Num)=""这种格式，记得要将dim Aegis(Num)定义
'.htw,C:\WINNT\system32\webhits.dll,3,GET,HEAD,POST
'.ida,C:\WINNT\system32\idq.dll,7,GET,HEAD,POST
'.idq,C:\WINNT\system32\idq.dll,7,GET,HEAD,POST
'.asp,C:\WINNT\system32\inetsrv\asp.dll,5,GET,HEAD,POST,TRACE
'.cer,C:\WINNT\system32\inetsrv\asp.dll,5,GET,HEAD,POST,TRACE
'.cdx,C:\WINNT\system32\inetsrv\asp.dll,5,GET,HEAD,POST,TRACE
'.asa,C:\WINNT\system32\inetsrv\asp.dll,5,GET,HEAD,POST,TRACE
'.idc,C:\WINNT\system32\inetsrv\httpodbc.dll,5,GET,POST 
'.shtm C:\WINNT\system32\inetsrv\ssinc.dll,5,GET,POST 
'.shtml C:\WINNT\system32\inetsrv\ssinc.dll,5,GET,POST 
'.stm C:\WINNT\system32\inetsrv\ssinc.dll,5,GET,POST 
'.asax C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.ascx,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.ashx,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG
'.asmx,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG
'.aspx,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG
'.axd,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG
'.vsdisco,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG
'.rem,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG
'.soap,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,1,GET,HEAD,POST,DEBUG
'.config,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.cs,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.csproj,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.vb,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.vbproj,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.webinfo,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.licx,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.resx,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
'.resources,C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll,5,GET,HEAD,POST,DEBUG
IIsWebServiceObj.ScriptMaps=Aegis
IIsWebServiceObj.SetInfo
'显示支持脚本语言
response.write "当前站点支持解析列表： "
For ValueIndex = 0 To UBound(IIsWebServiceObj.ScriptMaps)
response.write IIsWebServiceObj.Get("ScriptMaps")(ValueIndex)
response.write " "
Next
End Function

使用ASP列出NT用户组及用户

'=============================================================
'函数介绍：列出NT用户组及用户
'本函数使用ADSI，需要Administrators组用户权限
'函数名称：ListGroup(Computer)
'用法：ListGroup(计算机名称)
'例：显示127.0.0.1计算机NT用户组及用户
'ListGroup "127.0.0.1"
'=============================================================
Function ListGroup(Computer)
response.write "以下为计算机"&Computer&"系统用户组及用户列表"
Set ComputerObj = GetObject("WinNT://"&Computer)
ComputerObj.Filter = Array("Group")
For Each Member in ComputerObj
Response.Write "用户组："&Member.Name&" "
ListUser Computer,Member.Name
Next
end Function

'列出指定用户组用户
Function ListUser(Computer,Group)
Set UserObj = GetObject("WinNT://"&Computer&"/"&Group)
For Each Member in UserObj.Members
Response.write "    组中用户："&Member.Name &" "
Next
End Function

转自：http://goaler.xicp.net/ShowLog.asp?ID=479

本文地址：http://com.8s8s.com/it/it7467.htm