Win2000下直接读写磁盘扇区

类别:VC语言 点击:0 评论:0 推荐:
在NT和2000下,通过CreateFile来打开需要读写的驱动器,ReadFile、WriteFile来进行磁盘读写。

下面的代码演示了,如何读写A驱

/* -----------------------------------------------------

Read Floppy Disk Sector for win NT/2000
reads [numsec] sectors from [head] [track] [sector]

-------------------------------------------------------*/


char* ReadSectors(int head, int sector, int track, int numsec)
{


// getting logical sector from absolute head/track/sector ...
//计算扇区位置
int LogicalSector = (sector-1) +
(head*SECTORSPERTRACK) +
(track*SECTORSPERTRACK*NUMOFHEADS) ;

char *buffer ;
HANDLE hDevice ;


HANDLE hDevice;
char* buffer = (char*)malloc (512*numsec);
strset ( buffer , ' ');
DWORD bytesread ;

// getting a handle to the drive a: using
// CreateFile () function ....
//打开驱动器 \\.\A:
hDevice = CreateFile("\\\\.\\A:",
GENERIC_READ, FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL, OPEN_EXISTING, 0, NULL);

if (hDevice == NULL)
{
MessageBox ("Failed !");
return NULL;
}


// setting the file pointer to the start of the
// sector we want to read .
//移动文件指针到需要读取位置
SetFilePointer (hDevice,
(LogicalSector*512),
NULL,
FILE_BEGIN);

// reading sector(s) ...
//读数据
if (!ReadFile ( hDevice,
buffer,
512*numsec,
&bytesread,
NULL) )
{
/*
int err;
char error[10];
err=GetLastError ();
itoa (err, error, 10);
MessageBox (error, "Reading sectors ...Failed ");
return NULL ;
*/
}
//关闭
CloseHandle(hDevice);

return buffer ;
}

本文地址:http://com.8s8s.com/it/it403.htm